Concept 2000

CP11

(Not availeble - replaced by XP 11 - EAN-nr. 5703513054861 - Look under Concept 2000 XP)

Power supply type CP 11 is a 24 volt DC power supply for the CONCEPT 2000 system. The unit can supply 17 VA at 18 volts DC and can therefore provide for control of up to 20 lamps, curtains etc. The number of modules is, however, dependent on which modules are connected, and on whether button switches with indicator or monitor panels are also connected to the power supply. Power supply is provided via the 3-pin plug, which is connected to the modules. Plus (24 V DC), minus and data are connected via this plug.

Download product sheet in PDF-format

CP20

Switch-Link type CP 20 is an electronic input module with 8 channels where to touch buttons, sensors, and other components, which can produce a signal in the formof a potential-free opening or closing switches can be connected. The Switch-Link is designed for general control of a CONCEPT 2000 system with functions as 'All off', 'All on', light group turn on/off and light requirements in connection with dimmer modules. In other cases it is used for realisation of special functions.

Download product sheet in PDF-format

CP24

Universal Relay module type CP 24 is a programmable relay module with 4 relay outputs (2x2) - so that two outputs have a joint 13 A input. The module has 4 direct control inputs for control of the 4 relays. Each input is attached to a relay. The inputs can be programmed separately with function for toggle switch (standard) or special functions help relay or automatic step (with different times). Furthermore a mutual blocking of 2x2 relays can be programmed for curtain or screen control with help/ toggle switch/ or toggle with time function.

Download product sheet in PDF-format

CP31 LR

CP31LR is an intelligent programmable lightdimmer for dimming of 40-1000 VA ohmic and inductive load. CP31LR regulates logaritmically and has builtin softstart, termical fuse and null-wire failure detection. The lightdimmer is controlled by a switch connected to input G offering: ON, OFF, UP and DOWN. Operation over the databus controls up to 40 built-in functions, as for example: All Off, All On, Group Off, Group On (fixed light level), light scenes, Sleep timer, etc. Parallel operation via databus allows control of multiple CP31's.

Download product sheet in PDF-format

CP31 CR

CP31CR is an intelligent programmable lightdimmer unit for dimming of 40-600 VA ohmic and capacitive load. CP31CR regulates logaritmically and has built-in softstart, termical fuse and null-wire failure detection. In addition CP31CR has a electronic short fuse. The lightdimmer is controlled by a switch connected to input G offering: ON, OFF, UP and DOWN. Operation over the databus controls up to 40 built-in functions, as for example: All Off, All On, Group Off, Group On (fixed light level), light scenes, Sleep timer, etc. Parallel operation via databus allows control of multiple CP31's.

Download product sheet in PDF-format

CP31 BC

CP31BC is an intelligent programmable lightdimmer unit for dimming of HFloads for light tubes using 0-10V control signals. CP31BC regulates logaritmically and has built-in softstart, termical fuse and null-wire failure detection. The lightdimmer is controlled by a switch connected to input G offering: ON, OFF, UP and DOWN. Operation over the databus controls up to 40 built-in functions, as for example: All Off, All On, Group Off, Group On (fixed light level), light scenes, Sleep timer, etc. Parallel operation via databus allows control of multiple CP31's.

Download product sheet in PDF-format

CP33 LR

Remote control module IR-Link type CP 70A is especially developed for remote control of CONCEPT 2000 light control systemwith 38KHz infrared remote controls type CP 76 (8 channels) and type CP 79 (32 channels). IRlink type CP 70 can transmit 8 channels on the data bus and with possibilities of connection of up to 8 IR-preamplifiers.The module transmits at impact via infrared preamplifier a command over the data bus. Commands are received by the respective relay and dimmer modules, which then react on the command as required.

Download product sheet in PDF-format

CP70 IR-Link

CP33LR is a DIN rail based (2 M36 units 72 mm) 3-channel light dimmer for ohmic and inductive leading edge Triac control of 110/230vac glow lamps, halogen, traditional coiled transformers for low-volt halogen and HF coils for direct dimming.

Download product sheet in PDF-format

CP70 B&O-Link

BEO-Link type CP 70B is specially developed for infrared remote control of CONCEPT 2000 light control system with Bang & Olufsen remote control units, but can also be used for earlier Conson installations.

Download product sheet in PDF-format

CP70 UHF-Link

The CP70C UHF Link is an electronic UHF decoder module with 8 channels for IR remote control of 'Concept 2000' systems using a radio signal of 40 Mhz. The modules are especially suited for new or existing installations, additions or extensions. Even IR remote control of lighting etc., but where the possibilities of wiring to new switches is not practical.

Download product sheet in PDF-format

CP70 TIME-Link

CP 70D is a multi-functions module, which has a built-in 24-hour clock with a solution on one second and supplements the CONCEPT 2000 system with a number of subtleties, such as: - Burglar alarm - Imitated habitation - Turn on/off clock with battery back-up - Ventilator control for bathroom - Intelligent twilight relay - Detector of direction.

Download product sheet in PDF-format

CP485

CP 485 Interface module connect your Conson Concept 2000 system to your local network (LAN), where diffrent systems as Computers and PLC can be connected. If the Lan are connetced to the internet it's possible to control the Concept 2000 system from a homepage or E-mail from all over the world.

Download product sheet in PDF-format