XP11

The power supply XP11 is a 24 volt DC stabilized and short-end secure power supply to CONCEPT 2000xp system. The power supply can deliver 30 VA at 24 volts DC and can therefore provide the controllers of up to approx. 40 ignitions. The number of power supplies, however, depending on the number of system modules are connected and further connected with the pressure indication / ledelys external control accessories or monitoring panels.

See video presentation:

XP20

Switch-Link XP20 is an electric input-module with 8 canals where there can be connected push-buttons, sensors and other components, which can make a signal in shape of a potentialfree on or off switch. or Open Collector. The Switch-Link is made for control of a CONCEPT 2000xp installation with functions such as 'all off', 'all on', light on/off or light in med dimming-moduls. In other cases it can be used to realise special functions. It's possible to install max. 4 pc. of Switch– Link CP 20xp in a bussystem which makes it possible to control 32 canals.

XP24

Universal Relay Module XP24 is a program relay-module med 4 relay exits (2x2) - the 2 exits will then have a common 13 A entrance. The modul have 4 directly control entrances to control the 4 relays. Each entrance is connected to a relay. The entrances can seperately be programmed with a function for kiprelay (standard) or special-functions helping relay or stairsautomate (with different time). Furthermore there can be programmed a mutual blocking of the 2x2 relays for curdins- or screen control with help-/kiprelay-/ or kip with timefunction.

See video presentation:

XP31

Light Dimmer module XP31 is an intelligent universal programmable dampener unit for damping of 40-1000 VA ohmsk, inductive and capacitive loads. CP31xp regulates logarithmic and has built soft start, thermal protection, indicating breakage of neutral. Dimmers can be controlled directly with kiptryk, connected to minus (-) and crushed with G functions: on, off, up and down. By operation of data bus, up to 99 programmed functions performed. Dimmers also have daylight management light scenes and fade time features incorporated.

See video presentation:

XP31BC

Light Dimmer XP31BC module is an intelligent programmable damper device for damping of HF ballasts for fluorescent 0-10V control signal. XP31BC regulates logarithmic and has built soft start, thermal protection, indicating breakage of neutral. Dimmers can be controlled directly with kiptryk, connected to minus (-) and crushed with G functions: on, off, up and down. By operation of data bus, up to 40 programmed functions performed. Ballast controller also have daylight management light scenes and fade time features incorporated.

See video presentation:

XP31DD

Light Dimmer XP31DD module is an intelligent programmable damper device for damping of HF ballasts for fluorescent 0-10V control signal. XP31BC regulates logarithmic and has built soft start, thermal protection, indicating breakage of neutral. Dimmers can be controlled directly with kiptryk, connected to minus (-) and crushed with G functions: on, off, up and down. By operation of data bus, up to 40 programmed functions performed. Ballast controller also have daylight management light scenes and fade time features incorporated.

XP33

XP33 is a universal 3 channel's edge damper to regulate ohmsk, inductive and capacitive loads. XP33 regulates logarithmic and has built soft start, thermal protection and indication of a breach of the neutral. Each of the 3 channels can control up to 210 VA. Dimmers also have light scenes and fade time features incorporated.

See video presentation:

XP70A

Remote Control Module IR Link XP70A specially designed for wireless remote control of CONCEPT 2000 light control system with a 38KHz infrared handheld transmitter for example. ConKey CP79 (32 channels) or handheld handheld transmitters like. Philips Pronto or OneForAll Mosaic, Marantz and others IR link type CP70Axp can send 8 channels of data bus and connectivity of up to 8 IR amplifiers. It can be mounted up to 4 pcs. IR - Link CP 70 A in a bus so that you can control up to 32 channels.

XP70B

BEO-Link XP70B specially designed for wireless remote control of CONCEPT 2000 light control system with Bang & Olufsen handheld transmitters LIGHT function, but can also be used for older Conson installations. It can be mounted up to 4 pcs. B & O - Link CP 70B in a bus so that you can control up to 32 channels.

XP70C-S

UHF Link XP70C is an 8-channel UHF decoder for wireless remote control of lighting, curtains, engines, etc. Conson using 40,686 MHz and is thus not affected by the numerous products on the market that use 433.92 MHz, for example. Doorstep, thermometers, baby, house and car alarms, etc. It can be mounted up to 4 pcs. UHF Link CP 70 C in a bus so that you can control up to 32 channels.

XP70D

XP70D is a multifunction module that has an embedded 24-hour clock with a resolution of one second and complementary CONCEPT 2000 system with a range of features such as: - Anti-theft - 'at home' imitation - On / off timer with battery backup - Fan Control for bathroom - Intelligent twilight relays - Direction Detector.

XP130

XP 130 module allows you to control Conson Concept 2000xp from a local network or via the Internet. RS 485xp module converts data from the OS on your computer to ConBus data as Concept 2000 modules that act. You can control light, etc. by sending an email or SMS, turn up / down the heat, etc. In addition, the CP 485xp for programming Concept 2000xp modules via the Internet. There is also an opportunity to enter new firmware in XP modules.

See video presentation: